Inputting Copyright-Protected (Hdcp) Video - Roland V-600UHD Reference Manual

Video Input/Output Settings
Inputting Copyright-protected (HDCP)
Video
To input copyright-protected (HDCP) video from a Blu-ray Disc player
or the like, follow the steps described below to change the "HDCP"
setting.
* The V-600UHD must be connected to an HDCP compatible display
for HDCP protected video to be connected.
What's HDCP?
HDCP is copyright-protection technology that prevents unlawful
copying of content by encoding the path when sending digital
signals from a video playback device to a display monitor or
other display equipment.
1 .
Select the [MENU] button&"System"&"HDCP,"
and press the [VALUE] knob.
2 .
Use the [VALUE] knob to set this to "On."
Value Explanation
Copyright-protected (HDCP) video can be input. HDCP is also
On
added to the video that is output.
Off Copyright-protected (HDCP) video cannot be input.
3 .
Press the [MENU] button to quit the menu.
Checking HDCP-compatible equipment
When "HDCP" is set to "On, " you can use the [MENU] button& "Signal
Status" & "Input Ch.1–8" &"HDCP"& the Input menu to check the
status of HDCP compatibility of source equipment.
Output from Connectors
When "HDCP" is set to "On, " video is output only from the HDMI OUT
connectors.
HDMI OUT
OFF
SDI OUT
HDMI OUT
ON
SDI OUT
12
Operation of the HDCP indicator
Indicator HDCP Connection status
An HDCP-compatible device is connected to the HDMI OUT
Lighted On
connector.
On A device that does not support HDCP is connected.
Flashing
Video for which copy protection (HDCP) must be enabled is
Off
being input from the HDMI IN connector.
Dark Off —