Formatting Usb Flash Drives; Changing Cross-Point Assignments; Returning Settings To The Factory-Default State (Factory Reset) - Roland V-600UHD Reference Manual

Other Operations

Formatting USB Flash Drives

When you're using a USB flash drive for the first time, it must first be
formatted on the V-600UHD.
NOTE
5 The V-600UHD does not recognize unformatted USB flash drives.
5 Operation has been tested for commonly available USB flash
drives, but operation of all USB flash drives is not assured.
Depending on the manufacturer and type of the USB flash drive,
correct operation may not be possible.
5 Performing formatting causes all data already saved on the USB
flash drive to be deleted. If the flash drive contains necessary data,
back it up onto a computer or elsewhere before formatting the
drive.
5 Depending on the USB flash drive, recognition of the flash drive
might take some time.
1 .
Select the [MENU] button&"System"&for USB
Memory, select "Format," and press the [VALUE]
knob.
The message "Are you sure?" appears.
If you want to cancel the operation, select "NO, " and press the
[VALUE] knob.
2 .
Select "YES," and press the [VALUE] knob.
Formatting of the USB flash drive is carried out.
3 .
Press the [MENU] button to quit the menu.
24

Changing Cross-point Assignments

You can change the channels assigned to the cross-point [1]–[8]
buttons.
You can also disable operation of a cross-point button by assigning
no channel to the button.
1 .
Select the [MENU] button&"System"&
"Cross-point Assign," and press the [VALUE] knob.
2 .
Select cross-point cross point (from XPT1 to 8),
then use the [VALUE] knob to specify the channel
number (Ch. 1 to 8) to assign to the cross point.
* To assign no channel, specify "None. "
3 .
Press the [MENU] button to quit the menu.
Returning Settings to the Factory-default
State (Factory Reset)
You can return the values of settings on the V-600UHD to their
factory defaults.
NOTE
Executing a factory reset causes all values that have been set, settings
saved in memories (p. 22), and still images saved in the unit to be
lost.
1 .
Select the [MENU] button&"System"&
"Factoy Reset," and press the [VALUE] knob.
The message "Are you sure?" appears.
If you want to cancel the operation, select "NO, " and press the
[VALUE] knob.
2 .
Select "YES," and press the [VALUE] knob.
A factory reset is executed.
3 .
Press the [MENU] button to quit the menu.