Assigning A Bus To An Output Connector; Adjusting Final Output Video - Roland V-600UHD Reference Manual

Video Input/Output Settings

Assigning a Bus to an Output Connector

The V-600UHD has three internal buses (PGM, PVW, and AUX).
For each individual output connector, you can select which bus to
output.
1 .
Select the [MENU] button&"Output" to select the
output connector whose bus assignment you want
to change, and press the [VALUE] knob.
2 .
Select "Signal Bus," and use the [VALUE] knob to
select "PGM," "PVW," or "AUX," and set the assigned
bus.
Menu item Signal Bus setting
HDMI OUT 1 PGM, PVW, AUX
HDMI OUT 2 PGM, PVW, AUX
HDMI OUT 3 PGM, PVW, AUX
SDI OUT PGM fixed
MULTI-VIEW No bus selection
3 .
Press the [MENU] button to quit the menu.
10

Adjusting Final Output Video

You adjust the final video output to match the equipment receiving
output from the V-600UHD.
1 .
Select the [MENU] button&"System"&
"Processing," and press the [VALUE] knob.
2 .
Select a menu item, then use the [VALUE] knob to
adjust the output video.
& Details on menu items: see p. 41.
3 .
Press the [MENU] button to quit the menu.