System - Roland V-600UHD Reference Manual

Menu List

System

Menu item Value
Processing ENTER
59.94Hz
Frame Rate 50,
HDCP Off, On
Reference This sets the reference clock of the V-600UHD.
Internal
Source
SDI IN5
Clock Adjust
-4096–0–+4096
Line Adjust
-2160–0–+2160
Cross-point Assign
ENTER
Output Fade ENTER
Composition, Aux
Aux/Composition
Off, On
Memory Protect
Auto Memory Off, On
USB Memory You use the following items to work with a USB flash drive.
Parameter Load ENTER
Save ENTER
Save As ENTER
Delete ENTER
Still Image
ENTER
STILL1 Load
STILL2 Load ENTER
Format Execute
Off, On
RS-232
Baudrate
9600,
GPI ENTER
LAN Control ENTER
LED Dimmer
0–7
Fader Calibration ENTER
RGB IN1 Calibration ENTER
Factory Reset Execute
Version
40
(Bold: default)
38400
bps
Explanation
This displays detailed setup menu of processing.
This sets the frame rate.
This turns on/off the HDCP mode.
The V-600UHD's internal clock is used as the reference clock.
A signal input via one of the SDI IN5 connectors is used as the reference
clock.
This adjusts the phase horizontally.
Adjust this when output is horizontally out of sync with the operation of
other devices using the same clock.
This adjusts the phase vertically.
Adjust this when output is vertically out of sync with or field-shifted from
the operation of other devices using the same clock.
This displays detailed setup menu of channel assign to cross-points.
This displays detailed setup menu of output fade.
This sets which function to use, AUX or Composition.
When this is set to "On, " the memories are protected, and settings cannot
be saved to them.
Setting this to "On" enables last memory feature.
This displays the screen to select a file to load.
This displays the screen to select a file to save.
This displays the screen to edit the file name.
This displays the screen to select a file to delete.
This displays the screen to select a file to load for still image 1.
This displays the screen to select a file to load for still image 2.
This executes formatting of a connected USB flash drive.
This turns valid/invalid of remote control from an external RS-232 device.
This sets the communication speed (bps) of the RS-232 connector.
This displays detailed setup menu of GPI.
This displays detailed setup menu of LAN control.
This adjusts the brightness of the top panel LEDs.
This calibrates the video fader.
This calibrates the RGB IN 1.
This returns the unit to its factory defaults.
This displays the version of the system program.