Printer setup
Defaults
US/Non-US defaults changes whether the printer uses the US factory defaults or the non-US factory defaults.
The settings affected include paper size, envelope size, PCL symbol set, code pages, and units of measure.
Warning: Changing this setting resets the printer to factory defaults, and data may be lost. It cannot be undone.
Page Counts
All of the submenus under this menu are read only. You cannot chane any of the values. The page count can
only be viewed and cannot be changed.
To view the color page count, mono page count or the permanent page count:
1.
Select Page Counts from PRINTER SETUP.
2.
Scroll to the desired page count and press Select
3.
Press Back (
Serial Number
The serial number can only be viewed and changed.
To view or change the serial number:
1.
Select Serial number from PRINTER SETUP.
2.
Press Back (
Engine Setting 1 through 4
Warning: Do not change these settings unless requested to do so by your next level of support.
Model Name
The model name can only be viewed and cannot be changed.
)
to return to PRINTER SETUP.
)
to return to PRINTER SETUP.
..
5022-xxx
3-13
Diagnostic aids