Lexmark C520 Series Service Manual page 153

Menu item Purpose
Paper Prompts Controls the source the
printer selects for a change
paper source message. The
printer displays the change
paper source message
based on the size of the
paper requested and not by
the paper type.
Env Prompts Controls the source the
printer selects for a change
envelope source message.
The printer displays the
change envelope message
based on the size of the
envelope requested and not
by the envelope type.
Jobs on Disk Lets the user select whether
or not the printer deletes all
buffered jobs on the hard
disk.
Disk Encryption Controls whether the printer
encrypts the information
that it writes to the hard
disk.
When the value for Disk
Encryption, the printer
completely formats the hard
disk which means that all
information on the disk is
deleted.
Note: If an encrypted disk is
removed from the printer
and another disk is
installed, the message Disk
Corrupted. Reformat?
message appears. So, the
newly installed disk must
either be formatted or
removed from the printer.
The selections under the
message are Yes or No.
Values and descriptions
Auto
MP Feeder
Manual Paper
Auto
MP Feeder
Manual Env
Do Not Delete
Delete
Disable*
Enable
MP Feeder is only available on
some printer models.
Note: If the Configure MP setting is
changed to Manual, and a
power-on reset is performed, and
the value of the Paper Prompts
menu item before the power-on
reset was MP Feeder. Then, when
the printer restarts, the printer
automatically changes the Paper
Prompts setting to Manual Paper.
Load Manual overrides that would
result in a change paper message
are disabled for Paper or Env
prompts that are set to Manual,
Manual Paper, or Manual Env.
MP Feeder is only available on
some printer models.
Note: If the Configure MP setting is
changed to Manual, and a power-
on reset is performed, and the
value of the Env Prompts menu
item before the power-on reset was
MP Feeder. Then, when the printer
restarts, the printer automatically
changes the Env Prompt setting to
Manual Env.
Load Manual overrides that would
result in a change paper message
are disabled for Paper or Env
prompts that are set to Manual,
Manual Paper, or Manual Env.
This menu item only appears if a
hard disk is installed. It appears
even if no buffered jobs exist on the
hard disk.
The Disk Encryption menu item
only appears in the Configuration
Menu when:
• a non-defective disk is installed
in the printer
• the values of bits 3-2 of digit 4
in the Configuration ID 2 are
either 01 for Supported) or 10
for Supported with an internal
network adapter (INA).
Encrypting may be canceled if
Enable is selected. Formatting may
be canceled if Disable is selected.
Select one of these, then select No,
and press Select.
After pressing Select, the printer
performs the selected action on the
hard disk.
A graphic appears showing:
• either Encrypting Disk or
Formatting Disk
• a percentage scale
• the message DO NOT POWER
OFF
The process is complete when the
percentage scale displays 100%.
Diagnostic aids
5022-xxx
3-21