Lexmark C520 Series Service Manual page 163

15.
Look at the course and fine adjustments on the top left of the page and enter the best number for the top
adjustment in the T space. Go ahead and transfer this number over to the computation area for Z so that
you don't forget later.
16.
On the operator panel, use your up and down arrows to find Top Margin. Press Select and then use the
left and right arrows to enter the setting computed for T. Press Select to save.
17.
Repeat this process for skew (Z). Don't forget to add the T value and the current cyan Z value to obtain the
new skew (Z) value.
5022-xxx
4-9
Repair information