Mirror Motor Test; Servo Laser Test; Motor Calibration - Lexmark C520 Series Service Manual

5022-xxx

Mirror motor test

1.
Select Motor Tests from DIAGNOSTICS. Scroll until you reach Mirror Motor.
2.
Press Select
displays either "Pass" or "Fail".
3.
To stop the test, press Stop (

Servo laser test

1.
Select Motor Tests from DIAGNOSTICS. Scroll until you reach Servo Laser Test.
2.
Press Select
displays either "Pass" or "Fail".
3.
To stop the test, press Stop (

Motor calibration

1.
Select Motor Tests from DIAGNOSTICS. Scroll until you reach Motor Calibration.
2.
Press Select
3.
To stop the test, press Stop (
3-8
Service Manual
to run the test. The panel displays "Mirror Motor Test". After the test completes, the panel
).
to run the test. The panel displays "Servo Laser Test". After the test completes, the panel
).
to run calibration. The printer generates eight pages as part of this test.
).