Garden Map; Spot Cut / Scheduled; Scheduling Mowing Sessions; Data Package Management - Stiga A1500 Instruction Manual

4. Start recording the return journey to the docking station by pressing the dedicated button
5. Guide the robot lawn mower manually using the joystick along the path to be programmed until the
robot connects with the charging contacts
6. Con昀椀rm the recording.
NOTE: Do not move the robot lawn mower by hand, any manual handling of the robot lawn
mower requires the initialisation procedure to be repeated.
NOTE: The docking station can also be installed outside the working area. In this case, the robot
will use the entire re-entry path to return to the docking station and to reach the work area while
running.
NOTE: At the end of programming the return to base route, the robot lawn mower retraces the
entire route in order to check whether the programming was carried out correctly. This step is
necessary for safety reasons and cannot be ignored.

4.7.10. GARDEN MAP

From the "My Garden" section, users can access the garden map and view:
• Virtual boundaries.
• Areas to be avoided.
• Transfer routes.
• The real-time position of the robot lawn mower.
• The installation position of the satellite reference station.
• The location of the docking station and its return path.

4.7.11. SPOT CUT / SCHEDULED

The "Spot Cut / Scheduled" selector in the settings menu allows the user to activate or deactivate the
scheduled work programme.
The number of weekly hours to schedule are suggested by the app according to the size of the garden.
• If set to "Scheduled" the robot lawn mower works according to the scheduled work programme
• If set to "Spot Cut"the robot lawn mower works by performing a single work cycle.
NOTE: When the robot lawn mower ends a complete garden coverage cycle, it returns to the
docking station and remains there until the next pre-set start time.

4.7.12. SCHEDULING MOWING SESSIONS

The "Cutting Sessions" section allows the user to schedule the robot lawn mower's working hours and
days. The number of weekly hours to schedule are suggested by the app according to the size of the
garden.
Procedure:
1. From the "Settings" menu, select "Cutting Sessions" and choose a day of the week on which to set the
desired work sessions.
2. The user has the option of applying the same working hours to several days of the week.
3. The working time will be displayed within the day on which it is scheduled. By pressing on each working
time it is possible to copy or delete it.

4.7.13. DATA PACKAGE MANAGEMENT

The "Data Package" section allows the user to check the remaining hours of connectivity required to
operate the robot lawn mower.
In this section users can proceed directly to the purchase of connectivity packages.
EN 4. INSTALLATION 37