Siemens SIMOCODE pro C System Manual page 73

Module Control
supply
voltage
DM-F PROFIsafe fail-safe digital module
For fail-safe tripping via PROFIBUS/PROFIsafe:
2 relay enabling circuits, wired in parallel
2 relay outputs, common ground, fail-safe tripping
1 input for feedback circuit; 3 binary standard
inputs.
24 V DC
110 to
240 V
AC/DC
Analog module (AM)
By means of the analog module, the basic unit can
be optionally expanded by analog inputs and
outputs (0 to 20 mA).
2 inputs (passive) for inputting and 1 output for
outputting 0/4 to 20 mA signals.
—
Ground-fault module (EM)
The external ground-fault monitoring using
residual current transformer and ground-fault
module is normally used in the following cases:
in cases in which power systems are grounded
•
with high impedance
in cases, in which precise detection of the
•
ground-fault current is necessary, for example,
for condition monitoring.
—
—
Temperature module (TM)
Irrespective of the thermistor protection of the
basic units, an additional max. 3 analog
temperature sensors can be evaluated using a
temperature module.
Sensor types: PT100/PT1000, KTY83/KTY84 or
NTC
3 inputs for connecting up to 3 analog temperature
sensors.
—
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
MLFB Diagram
2)
3UF7330-1AB00-0
3UF7330-1AU00-0
3UF7400-1AA00-0
3UF7500-1AA00-0
for connecting
a 3UL22 residual-
current transformer
3UF7510-1AA00-0
for connecting
a 3UL23 residual-
current transformer
3UF7700-1AA00-0
An overview of system components
Number that can be connected to
pro C pro S V PN pro V
GP PB
— — — 1 (from
*E07*)
— — —
1 (from
*E07*)
— — — 1
— — — 1 (from
*E02*)
— 1 1 1 (from
*E10*)
— 1 1 1 (from
3) 3)
*E02*)
pro V pro V pro V
MR PN EIP
— 1 —
— 1 —
1 2 2
1 1 1
1 1 1
(from
*E04*)
1 2 2
73