Siemens SIMOCODE pro C System Manual page 194

Mounting, wiring, connecting, system interfaces, configuration guidelines
12.1 Mounting
Figure 12-9
Tightening torque of the screws
To ensure that the panel will function correctly and is sealed to comply with IP54, the
tightening torque of the screws provided must not be set too high when mounting and the
seal must be properly fitted.
Note
Only one connecting cable is required for connecting the operator panel with display to
SIMOCODE pro (see Chapter An overview of system components (Page 65)). Additional
wiring for the power supply or ground is not required.
194
Mounting the operator panel with display
WARNING
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro