Siemens SIMOCODE pro C System Manual page 156

Description of system components
8.14 Configuration information for SIMOCODE pro V when using an older basic unit
Maximum configuration with expansion modules
Table 8- 7 Maximum configuration with expansion modules when using an operator panel/operator panel with display, a
1st generation current/voltage measuring module and a decoupling module for SIMOCODE pro V PB basic
units (3UF7010-1A.00-0) with a 24 V DC or 110 V - 240 V AC/DC supply
OP Measurement Decoupling
None/ I
OP
U/I
U/I
4)
OPD I
U/I
U/I
4)
1) No bistable relay outputs and no more than 5 of 7 relay outputs active simultaneously
(> 3 s)
2) No bistable relay outputs and no more than 3 of 5 relay outputs active simultaneously
(> 3 s)
3) Analog module output is not used.
4) 1st generation current/voltage measuring modules; MLFB ending in 000
(e.g. 3UF7110-1AA00-0)
5) AM and TM cannot be used at the same time
156
SIMOCODE pro basic unit
U
s
DM-F/ DM
module DM
- ✓ ✓
- ✓ ✓
✓ ✓ ✓
1) 1)
- Max. 4 modules
- Max. 4 modules
✓ ✓ -
✓ ✓
= 24 V DC
AM TM EM DM-F/
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
- ✓ ✓
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro basic unit
U = 110-240 V AC/DC
s
DM AM
DM
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ -
✓ ✓ ✓
1) 1)
✓ - ✓
✓ - ✓
Max. 4 modules
Max. 3 modules
- - ✓
✓ - ✓
2)
✓ ✓ -
✓ ✓ ✓
1) 1) 3)
✓ - -
TM EM
✓ ✓
✓ ✓
✓ ✓
✓ -
✓ -
- ✓
5)
✓ -
✓ ✓
- -
- -
✓ ✓
SIMOCODE pro