Audio Dubbing - Sony SLV-SF990G Operating Instructions Manual

Audio dubbing

This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
Before you start
• Turn on the TV and set it to the video
channel
1
Insert a source tape into the stereo system (or the playback VCR). Search for the
point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into your (recording) VCR.
Search for the end of the section to be replaced and press X PAUSE.
3
Press CLEAR to reset the counter to "0H00M00S."
4
Rewind the prerecorded tape to the beginning of the section to be replaced.
The VCR enters pause mode.
5
Press AUDIO DUB.
The
6
To start editing, press the X PAUSE buttons on your VCR and the stereo system
(or other VCR) at the same time.
When the counter reaches "0H00M00S," audio dubbing stops automatically.
To stop while editing
Press x (stop) on this VCR and the stereo system (or other VCR).
78
Audio dubbing
...
indicator appears in the display window.
CLEAR
1 2 3
AUDIO DUB
4 5 6
7 8 9
0
X
PAUSE