Step 5 : Setting Up The Vcr With The Auto Set Up Function - Sony SLV-SF990G Operating Instructions Manual

Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function.With this function, you can set the language for the on-screen display, TV
channels, guide channels for the VIDEO Plus + system, and VCR clock
automatically.
Before you start ...
• Turn on the set -top box if it is connected to the VCR only by the aerial cable and not to the
Scart cable.
Hold down AUTO SET UP on the VCR for more than 3 seconds.
AUTO SET UP
The VCR automatically turns on, and starts searching for all of the
RF CHANNEL receivable channels and presets them in the appropriate order for your local
area.
If you use the SMARTLINK connection, the Preset Download function
starts and the SMARTLINK indicator flashes in the display window during
download.
After the search or download is complete, the current time appears in the
display window for any stations that transmit a time signal.
To cancel the Auto Set Up function
Press AUTO SET UP.
Notes
• Do not cancel the Auto Set Up function during step 3. If you do, repeat Auto Set Up from the
beginning.
• When you operate the Auto Set Up function, some of the settings (VIDEO Plus +, timer
etc...) will be reset. In this case, you have to set them again.
AUTO SET UP
g
PROGRAM +/–
AUTO SET UP SMARTLINK
OPC
VPS
PDC
EDIT
Setting up the VCR with the Auto Set Up function
SP EP STEREO
LP VIDEO TV
H M S
NICAM
21