Sony SLV-SF990G Operating Instructions Manual page 19

4
Tune in the programme position you have
selected (for ex. programme position "0")
until the picture shown on the right appears
clearly on the TV screen (background must
be green).
Refer to your TV manual for tuning
instructions.
If the picture does not appear clearly, see
"To obtain a clear picture from the VCR"
below.
5
Press RF CHANNEL.
AUTO SET UP
You have now tuned your TV to the VCR. From now on, whenever you
RF CHANNEL
want to play a tape, set the TV to the video channel (for ex. programme
position "0").
You can now set your VCR with the Auto Set Up function (see page 21).
To check if the TV tuning is correct
Set the TV to the video channel (for ex. programme position "0") and press
PROGRAM +/– on the VCR. If the TV screen changes to a different programme each
time you press PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 5 above, press PROGRAM +/–, so that
another RF channel appears.Then tune the TV to the new RF channel until a clear
picture appears.
SONY VIDEO CASSETTE RECORDER
continued
Tuning your TV to the VCR
19