Registering The Contents Of A Recorded Tape In The Smartfile Label - Sony SLV-SF990G Operating Instructions Manual

Sony operating instructions video cassette recorder slv-sf990g

Table of Contents

Registering the contents of a recorded

tape in the SmartFile label

The VCR will register programmes

recorded on a tape (even a non-SmartFile

recorded tape) in the memory of a new

SmartFile label by detecting the index

signals indicating the start of recorded

programmes. You can register up to the 12th

programme from the start of the tape. The

programmes appear from the bottom of the

screen as PROGRAM NO. 1, PROGRAM

NO.2, ... PROGRAM NO.12 in this order.

The 13th and subsequent programmes are

ignored. You can manually name the

registered programme numbers and select

the category (see page 90).

Before you start

• Turn on your TV and set it to the video channel.

• Turn on your VCR.

Attach the SmartFile label to the spine of the

cassette as shown on the right and insert the

tape.

Press the SMARTFILE GENERATOR button on

the VCR.

A message appears indicating that the recorded

programmes are being registered. The index

signals are detected from the start of the tape,

and the registration stops when the end of the

tape is reached. The message disappears when

registration is complete.

To stop registration to the SmartFile label

Press SMARTFILE GENERATOR.

The data registered before the button is pressed remains in the SmartFile label. You

can register the programmes again by pressing SMARTFILE GENERATOR again.