Sony SLV-SF990G Operating Instructions Manual page 20

If you have connected your VCR to the TV with a Scart
(EURO-AV) connector and an aerial cable as well
In order to avoid any interferences with existing broadcasts, we recom-
mend you to set RF channel to the OFF position.
1
•
2
AUTO SET UP
RF CHANNEL
3
- PROGRAM +
TRACKING
4
AUTO SET UP
RF CHANNEL
Note
• If in step 3 the green screen does not appear, select the "AV/EXTERNAL" source on your TV
(please refer to your TV instruction manual).
20
Tuning your TV to the VCR
g
Turn on your TV and press ?/1 (on/standby) to turn on the VCR.
Pull down the drop down panel.
Press briefly RF CHANNEL on the VCR.
The factory-preset RF (Radio Frequency) channel appears in the display
window.
Press PROGRAM +/- until the OFF indication appears in the display
window. The RF channel is then switched off.
The picture shown below appears clearly on the TV screen (background
must be green).
Press RF CHANNEL again.
You can now set your VCR with the Auto Set Up function (see page 21).
RF CHANNEL
PROGRAM +/–
AUTO SET UP SMARTLINK SP
OPC LP
VPS
PDC
H
EDIT
AUTO SET UP SMARTLINK SP
OPC LP
VPS
PDC
H
EDIT
SONY VIDEO CASSETTE RECORDER
EP STEREO
VIDEO TV NICAM
M S
EP STEREO
VIDEO TV NICAM
M S