Sony SLV-SF990G Operating Instructions Manual page 7

To
Call up the on-screen display
Change the Teletext page
Operate the TV menu
Switch to/from wide mode of a Sony wide TV (For other
manufactures' wide TVs, see "Controlling other TVs with
the remote commander".)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one together.
• Do not use different types of batteries together.
• Some buttons may not work with certain Sony TVs.
Setting the COMMAND MODE switch
To control the Sony VCRs with
this remote commander, set
COMMAND MODE on the
remote commander to the same
position as the one on the VCR.
Usually, it is set to VTR3. Change
the position as shown below to
control other Sony VCRs :
VTR1 : For Sony Betamax
format VCRs
VTR2 : For Sony 8mm
format VCRs
VTR3 : For Sony VHS
format VCRs
Press
DISPLAY
c/C
Menu buttons
WIDE
COMMAND
MODE
1 2 3
4 5 6
7 8 9
0
continued
Setting up the remote commander
7