Adjusting The Picture - Sony SLV-SF990G Operating Instructions Manual

Adjusting the picture

Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape (the
flashes in the display window, then goes off),
distortion may occur if the tape was recorded in poor
condition. In this case, manually adjust the tracking.
During playback, press TRACKING +/– to display
the tracking meter. The distortion should disappear
as you press one of the two buttons (the
lights up). To resume automatic tracking
adjustments, eject the tape and re-insert it.
To set the tracking to the centre position, press
TRACKING + and
About the Reality Regenerator (RR) function
The Reality Regenerator (RR) function automatically restores the picture to its
original quality during playback.
To use the RR function, press
REALITY REGENERATOR button.
The REALITY REGENERATOR
indicator lights up. You can set RR to
HIGH or NORMAL in the VIDEO
OPTIONS menu (see page 72).
To turn it off, press REALITY
REGENERATOR. The REALITY
REGENERATOR indicator lights off.
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC) function
automatically improves recording and playback
quality by adjusting the VCR to the condition of the
video heads and tape. To maintain better picture
quality, we recommend that you set OPC to ON in
the VIDEO OPTIONS menu (with the OPC
indicator in the display window lit). For details, see
page 72.
OPC playback
The OPC function automatically works on all types of tapes, including rental tapes
and tapes that were not recorded with OPC.
70
Adjusting the picture
indicator
buttons at the same time.
–
indicator
Tracking meter
g
REALITY REGENERATOR
VIDEO OPTIONS
OPC
EDIT
SHARPNESS
RR
RETURN
SELECT :
SET : OK
TRACKING
ON
OFF
NORMAL
NORMAL
EXIT : MENU