Sony SLV-SF990G Operating Instructions Manual page 35

4
Press PROG +/– to select the programme
PROG
position.
5
Press OK to highlight the channel
number row, then press CURSOR M/m to
CURSOR
start tuning.
The VCR starts searching for a channel
OK
and displays the first one it finds on the
TV screen. Press CURSOR M/m
repeatedly until the channel you want is
displayed.
The channels are scanned in the
following order:
• UHF B21 - B69
If you know the number of the channel you want, press the programme
number buttons. For example, for channel 05, first press "0" and then
press "5."
6
Press OK.
OK
7
To allocate another channel to another programme position, repeat steps 4
and 5.
8
Press MENU to exit the menu.
MENU
Selected programme
position
TUNER
PROG.
CHANNEL SET C 1 2
AFT ON
FINE TUNING
RETURN
SELECT :
SET : OK
EXIT :
TUNER
PROG.
CHANNEL SET C 2 7
AFT ON
FINE TUNING
RETURN
SELECT :
CONFIRM : OK
EXIT :
continued
Presetting channels
4
MENU
4
TUV
MENU
35