Controlling Other Tvs With The Remote Commander - Sony SLV-SF990G Operating Instructions Manual

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is
listed in the table below, set the appropriate manufacturer's code number.
1
Set TV/VIDEO at the top of the remote commander to TV.
2
Hold down ?/1, and enter your TV's code number(s) using the programme
number buttons.Then release ?/1.
Now you can use the following TV control buttons to control your TV:
?/1, TV/VIDEO, programme number buttons, –/– – (ten's digit), PROG +/–,
2 +/–, a (TV), / (Teletext), FASTEXT buttons, WIDE
*
/
M
* These buttons may not work with all TVs.
Tip
• When you set your TV's code number correctly while the TV is turned on, the TV turns off
automatically.
8
Setting up the remote commander
* * * *
/ / , and OK .
m < ,
* , MENU * , CURSOR