Sony SLV-SF990G Operating Instructions Manual page 66

3
Press CURSOR M/m to highlight TIMER LIST,
then press OK:
• If you want to change or cancel a setting, go
• If you do not need to change or cancel the
4
Press CURSOR M/m to select the setting you
want to change or cancel, then press OK.
The selected setting appears in the TIMER
menu.
5
• To change the setting, press CURSOR </, to highlight the item you want
• To cancel the setting, press CLEAR.
6
Press MENU.
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Tip
• In step 5 above, you can check the TIMER LIST by selecting LIST and pressing OK. Press
MENU to exit the TIMER LIST.
66
Checking/changing/cancelling timer settings
on to the next step.
settings, press MENU, then turn off the VCR
to return to recording standby.
to change, and press CURSOR M/m to change it.
Programme 1
Programme 2
Programme 1
Programme 2
will be cut off
about 20 seconds will be cut off
TIMER LIST
2 8 . 9
DATE TIME PROG.
TODAY 2 0 : 0 0 2 1 : 0 0 AAB
MON – FRI 1 4 : 0 0 1 5 : 0 0 FGH
3 0 . 9 2 0 : 0 0 2 1 : 0 0 AAB
SUN 6 : 3 0 7 : 0 0 I J K
2 . 1 0 1 0 : 0 0 1 1 : 3 0 CDE
– – . – – – : – – – : – – –
– – . – – – : – – – : – – –
– – . – – – : – – – : – – –
RETURN
SELECT :
SET : OK
CANCEL : CLEAR
EXIT :
TIMER
2 8 . 9
DATE TIME
2 . 10 1 0 : 0 0 1 1 : 3 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
about 20 seconds
THU
VPS
PDC
SP
LP
SP
LP
LP VPS
PDC
– –
– –
– –
MENU
THU
PROG.
C DE
ON
MENU