Print Test 1 - Lexmark Optra E 4026-0 Series Reference Handbook

• Top Margin can be set between -20 and +20. Changing the
number by one moves the margin by 1/75 inch. Moving the
number in a positive direction moves the margin down the
page and widens the top margin. Moving the number in a
negative direction moves the text up the page and narrows
the top margin.
• Bottom Margin can be set between -20 and +20. Moving the
number in a positive direction moves the margin down and
narrows the bottom margin. Moving the number in a negative
direction moves the text up the page and leaves a wider
bottom margin.
6. Select [+] to move the number in a positive direction or select [-]
to move the number in a negative direction. Select [SAVE] to
save your settings when they are correct.
7. Select [Quick Test] to check your settings.
8. Press Return to return to the Diagnostics mode main menu.

Print Test 1

Print Test 1 generates one printout similar to the test page and will not
duplex.
This test prints from the user-selected default paper source if the default
source is a tray, or from Tray 1 if the default source is a feeder. You can
change the default source by selecting Paper Source in the Paper
Menu. After running the test, reset the default source to the customer's
selection.
To run Print Test 1:
1. Enter Diagnostics mode.
2. Select [PRINT TESTS].
3. Select [Print Test 1].
4. Select [Single] or [Continuous].
5. Select [CANCEL] to stop continuous print.
6. Press Return to return to the Diagnostics mode main menu.
8-25
4049-XXX