Model 8408-44E Technical Documentation For Eu Regulation 617/2013 - IBM 8408-44E Site And Hardware Planning

Table 8. Noise emissions for the 8408-E8E
Declared A-weighted sound power level,
Product description
L
Wad
Notes:
1. Declared level L is the upper-limit A-weighted sound power level. Declared level L
Wad
A-weighted emission sound pressure level that is measured at the 1-meter bystander positions.
2. All measurements made in conformance with ISO 7779 and declared in conformance with ISO 9296.
3. 10 dB (decibel) equals 1 B (bel).
4. Notice: Government regulations (such as those prescribed by OSHA or European Community Directives) might
govern noise level exposure in the workplace and might apply to you and your server installation. This IBM
system is available with an optional acoustical door feature that can help reduce the noise that is emitted from
this system. The actual sound pressure levels in your installation depend upon various factors, including the
number of racks in the installation; the size, materials, and configuration of the room where you designate the
racks to be installed; the noise levels from other equipment; the room ambient temperature, and employees'
location in relation to the equipment. Further, compliance with such government regulations also depends upon
various extra factors, including the duration of employees' exposure and whether employees wear hearing
protection. IBM recommends that you consult with qualified experts in this field to determine whether you are
in compliance with the applicable regulations.
Table 9. Service clearances
Clearances Front
Operating 762 mm (30 in.)
Nonoperating 762 mm (30 in.)
1
Side and top clearances are optional during operation.
Electromagnetic compatibility compliance: CISPR 22; CISPR 24; FCC, CFR 47, Part 15 (US); VCCI
(Japan); Directive 2004/108/EC (EEA); ICES-003, Issue 4 (Canada); ACMA radio communications
standard (Australia, New Zealand); CNS 13438 (Taiwan); Radio Waves Act, MIC Rule No. 210 (Korea);
Commodity Inspection Law (China); TCVN 7189 (Vietnam); MoCI (Saudi Arabia); SI 961 (Israel); GOST R
51318.22, 51318.24 (Russia)
Safety compliance: UL 60950-1:2007 Underwriters Laboratory; CAN/CSA22.2 No. 60950-1-07;
EN60950-1:2006 European Norm; IEC 60950-1 2nd Edition and all National Differences
Special Hardware Management Console considerations
When the server is managed by an HMC, the console must be provided within the same room and
within 8 m (26 ft) of the server. For more considerations, see Installing and configuring the HMC.
Note: As an alternative to the local HMC requirement, you can provide a supported device, such as a
PC, with connectivity and authority to operate through a remotely attached HMC. This local device must
be in the same room and within 8 m (26 ft) of your server. This local device must provide functional
capabilities that are equivalent to the HMC that it replaces. This local device is needed by the service
representative to service the system.

Model 8408-44E Technical Documentation for EU Regulation 617/2013:

International Business Machines Corporation
New Orchard Road
Armonk, New York 10504
http://www.ibm.com/customersupport/
12
Site and hardware planning
1, 2, 3
(continued)
(B)
Rear
762 mm (30 in.)
762 mm (30 in.)
Declared A-weighted sound pressure level,
L (dB)
pAm
is the mean
pAm
1
Side
762 mm (30 in.)
1
Top
762 mm (30 in.)