IBM 8408-44E Site And Hardware Planning page 49

Table 57. Dimensions (continued)
Dimensions
Width without side panels
Width with side panels
Depth with back door only
Depth with back door and front door
Depth with sculptured style front door
Base rack (empty)
1
Full rack
Table 58. Electrical
Electrical characteristics
DC rack voltage (nominal)
Power source loading maximum in kVa
Voltage range (V dc)
AC rack
Power source loading maximum in kVa (per PDU)
Voltage range (V ac)
Frequency (Hz)
The 7188 power distribution unit used with this rack is mounted horizontally and requires one EIA unit of space.
Table 59. Service clearance
Front
915 mm (36 in.)
See your server or hardware specifications for specific temperature and humidity requirements.
Rack noise levels are a function of the number and type of drawers installed. See your server or
hardware specifications for specific requirements.
Rack airflow requirements are a function of the number and type of drawers installed. Refer to the
individual drawer specifications.
Notes:
1. Configuration dependent, base rack weight plus the weight of the drawers mounted in the rack. The
rack can support up to a maximum weight of 22.7 kg (50 lb) per EIA unit.
2. Recommended minimum vertical service clearance from floor is 2439 mm (8 ft).
Properties
590 mm (23.2 in.)
610 mm (24 in)
996 mm (39.2 in.)
1000 mm (39.4 in.)
Not applicable
98 kg (217 lb)
665 kg (1467 lb)
Properties
Not applicable
Not applicable
Not applicable
See your server or hardware specifications for specific
requirements
See your server or hardware specifications for specific
requirements
See your server or hardware specifications for specific
requirements
50 or 60
Back
760 mm (30 in.)
Sides
915 mm (36 in.)
Site and hardware planning
33