Programming; Access To The Programming; Browser Key - Wega Wegaconcept Use And Maintenance Manual

Insert the USB drive in the appropriate reader (7)
Scroll the menu until the item is highlighted.
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Confirm to access the menu.
Select the language to use.
After confirming your language, the software update
ENTER
will start.
Deletion
of memory ERASING FLASH S1...S2
cells
Software
update
PROG. RECORD
[
Update
completed.
DOWNLOAD COMPLETED OK
PLEASE SWITCH OFF-ON
Turn the machine off and then back on to complete the
operation.
!
Do not use the supplied drive to perform the
upgrade, but always get a new USB drive.
Do not remove the USB drive during update. If the
!
operation fails, it will be necessary to manually turn
the machine off and back on, inserting the USB drive
provided by the manufacturer.
Technical manual
28

Programming

This paragraph deals with the programming menu
that allows the user to program the various functions
of the machine.
It also explains how to reset the machine by reloading
the default manufacturer's data to the memory.
28.1
To access machine programming, proceed as follows:
insert the USB drive in the program reader (7), the
browser key will light up;
hold down the ENTER but-
ton for at least 5 seconds.
The display will show the
programming menu.
####
]
28.2
All the machine programming operations carried out
using the browser key.
During the programming phase a menu will
be displayed, from which it's possible to select the
parameters to be changed.
01 SERV. BOILER PRESS
02 COFFEE WATER TEMP.
03 GROUPS TEMPERAT.
04 CUP HEATER TEMP.
i

Access to the programming

Browser key

The menu item, or the parameter that has been
selected is highlighted by lighting up. To exit the
menu, press the ( ) or ( ) key.
Wegaconcept
7
Browser key
39