URBAN
6.4.3
Raised cup grilles
When using cups with different heights, use special retract-
able grilles (7) that are supplied with the machine.
To use the pull-out grille, extract it from its storage position by
pulling it outwards until it is fully locked in position.
When the grille is no
longer needed, push
it back in towards the
machine until it disap-
pears completely into
its storage position.
6.5 Dispensing coffee
Do not remove the filter holder from the dispens-
ing group when coffee is being dispensed.
Preparing the filter holder
6.5.1
Before filling the filter holder, make sure it is
empty and any previous coffee residue has been
removed.
• Fill the filter with a dose of ground coffee (approx. 6-7 g)
and compress it with the tamper.
• Hook the filter holder to the group without closing it too
tightly in order to prevent the gasket from wearing quickly.
• For the same reason, we recommend cleaning the filter rim
before attaching the filter holder to the dispensing group.
• Follow the procedures specified by the manufacturer of
the grinder-dispenser.
44
204
of
7
6.5.2
Dispensing
• Place the coffee cup under the
dispensing spout.
• Press the desired dose button, e.g.
and wait for the coffee to
finish being dispensed (LED will
switch on).
• To stop coffee dispensing ahead of
time, press the
button again.
Group
Icon for beverage
being dispensed
• In order to continuously dispense coffee, select the
button and stop it by pressing the same
Programming coffee doses
6.5.3
Each dose must be programmed with freshly
ground coffee and not with previously-used cof-
fee grounds.
The machine is programmed by default. Should the coffee
doses need to be modified, see para. 7.3.1 on page 49.
START
STOP
Temperature
Pump
pressure
button again.
USER manual