Alarm Reset; Resetting Groups Washing Counter; Water Liters Count For Softener Regeneration Reset; Cycle Count For Planned Service Reset - Wega Wegaconcept Use And Maintenance Manual

32.2

Alarm reset

To reset the counters of the doser alarms, proceed
as follows:
insert the USB drive in the
programming reader (7);
hold down the ENTER but-
ton for at least 5 seconds.
scroll the menu until the
item "10 COUNTERS" is high-
lighted.
press ENTER to view the
menu
09 FILTER REGENERAT.
press ( ) repeat-
10 COUNTERS
edly to reach
11 CLOCK SETUP
alarms page;
12 WORKING DAYS
press ( ) to re-
set the alarms;
XX - DDMMYY
c o n f i r m b y
XX - DDMMYY
pressing ( ) for
XX - DDMMYY
3 seconds.
XX - DDMMYY
Section III - Electrical/ Hydraulic diagrams
Technical manual
7
XX - DDMMYY
XX - DDMMYY
XX - DDMMYY
XX - DDMMYY
RESET COUNTS?
PRESS KEY ^ 3 SEC
32.3

Resetting groups washing counter

See par. 28.18 .
32.4 Water liters count for softener
regeneration reset
See par. 29.2.
32.5

Cycle count for planned service reset

See chap. 30.2 .
32.6

Ground coffee kg count reset

See chap. 30.3 .
Wegaconcept
57