Machine Serial Programming; Data Reset; Resetting Of Selection Counters - Wega Wegaconcept Use And Maintenance Manual

Wegaconcept
31

Machine serial programming

This function permits inserting the serial number of
the machine.
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)
Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Confirm and set the number of groups.
GROUPS NUMBER
Press ( ) or ( ) to modify the serial number
SERIAL NUMBER
Y/N :
Press ( ) or ( ) to select the character to be modi-
fied
To modify the value of the character press the button
( ) or ( ) .
ENTER Confirm and return to the main menu.
!
If the serial number is composed of 6 numbers, it is
necessary to set the first four digits with a
for example:
0000619347
i
Programming of the machine serial number is
activated only for a technician. The serial number
can be programmed again later.
56
X
XXXXXXXXXX
value:
0
.
32

Data reset

32.1

Resetting of selection counters

To reset the counters of each section, proceed as
follows:
insert the USB drive in the
programming reader (7);
hold down the ENTER but-
ton for at least 5 seconds.
scroll the menu until the
item "10 COUNTERS" is high-
lighted;
press ENTER to
09 FILTER REGENERAT.
view the menu
10 COUNTERS
11 CLOCK SETUP
press ( ) to re-
12 WORKING DAYS
set the partial
counters;
c o n f i r m b y
pressing ( ) for
3 seconds.
i
With this procedure only the partial selections are
reset (for each key). it is impossible to reset the total
count (machine life).
TOTAL COFFEES
00000
RESET COUNTS?
PRESS KEY ^ 3 SEC
Technical manual
7