Wega Wegaconcept Use And Maintenance Manual page 55

Once you set the limit threshold in kg of coffee, you
must set each beverage key and assign the correct
weight of ground coffee used to it.
Press ( ) to view the key-dose grammage screen.
k1 gr.00
k2 gr.00
k3 gr.00
kC gr.00
Press the ENTER key, the value referred to the "k1" key
ENTER
will flash.
Enter the amount in grams of ground coffee per pro-
grammed dose using the key ( ) or ( ) .
The available range is: 0 ÷ 22 g.
k1 gr.00
k2 gr.00
k3 gr.00
kC gr.00
Confirm by pressing ENTER, the system will switch to
ENTER the next data. Repeat the previous step until all the
dose keys are set.
After completing this operation, during in the use, the
count will be increased by the dose set for each drink,
with every coffee delivery.
k1 k2 k3
Key - value correspondence on the display
i
Setting the "GRINDERS WEAR" threshold to 0, the
system will not perform any reporting.
i
By setting one or more dose-keys to 0, those keys
will not be counted.
Technical manual
k4 gr.00
k5 gr.00
k6 gr.00
k4 gr.00
k5 gr.00
k6 gr.00
k4 k5 k6 kC
Setting example:
K1 gr.07 (Single espresso)
K2 gr.14 (Double espresso)
K3 gr.07 (Single medium)
kC gr.07 (Continuous)
Upon reaching the amount of kg set as the threshold,
the system will show a message on the display (bottom
row), reminding the user to carry out the replacement
of the grinding of the coffee grinder-doser.
Reset
To reset the used kg counter proceed as follows:
Display the screen below.
WEAR ABD BLADES
kg XXXX/YYYY
Press the key ( ) .
RESET ALARMS
PRESS KEY ^ 3 SEC
confirm by pressing ( ) for 3 seconds.
!
The system operates only if the machine is paired
with a single grinder.
Wegaconcept
K4 gr.14 (Double medium)
K5 gr.07 (Single long)
K6 gr.14 (Double long)
55