Output Fields For The Show Chassis Command - Ericsson SmartEdge 600 Hardware Manual

Table 35 Port Types
Port Type
atm
pos
ethernet
3.5

Output Fields for the show chassis Command

Table 36 Output Fields for the show chassis Command
Field
Current platform is
Slot
Configured type
Installed type
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
Description
ATM OC-3 or ATM OC-12 port
OC-192c/STM-64c, POS OC-3c/STM-1c, POS OC-12c/STM-4c, and POS OC-48c/STM-16c
Ethernet or Gigabit Ethernet port (any version)
Description
Chassis type: SE600 chassis.
slot—Slot number for this unit.
Slot is configured for one of the following card types:
• traffic-card-type—Line card is configured.
• xcrp—Controller card of any type or controller carrier card is configured.
• ase—Advanced Services Engine.
• sse—SmartEdge Storage Engine.
• none—Slot is not preconfigured.
Slot has card installed:
• carrier—I/O carrier card; always reported for slot 2.
• traffic-card-type—Line card is installed.
• xcrp—Controller card of any type or controller carrier card is installed.
• ase—Advanced Services Engine.
• sse—SmartEdge Storage Engine.
• none—Slot is empty.
• unknown—Controller card is installed but not initialized.
Hardware Control and Troubleshooting
(1)
53