Connections For External Timing Cables - Ericsson SmartEdge 600 Hardware Manual

2.8.2 Local or Remote Console Terminal
Figure 18
A local or remote console terminal is connected to the SmartEdge 600 router
using the Craft port on the front of a controller card. This type of connection
provides access to the operating system CLI, either directly or through a
terminal server.
A null modem is needed when connecting this cable to a modem; it is not
needed when connecting it to a PC or terminal server.
This port is always available; all system messages are directed to this port
during a power on or reload operation.
Note: When you first power on the system, the active controller card is in slot
2.9

Connections for External Timing Cables

Figure 19
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
Connections for a Local or Remote Console
6. Thereafter, the slot changes whenever a switchover occurs.
Connections for External Timing Cables
Installing the Hardware
41