60-Port Fast Ethernet Card - Ericsson SmartEdge 600 Hardware Manual

SmartEdge 600 Router Hardware Guide
6.9.1 Status LEDs
Figure 43
Table 109 Equipment LEDs on 12-Port 10/100TX Ethernet Card
Label Activity
FAIL On
Off
ACTIVE On
Off
(1) A failure can be total, partial, or forced. Failure on any part of the card, including failure of any of its ports, results in
the FAIL LED being on.
Table 110 Facility LEDs on 12-Port 10/100TX Ethernet Card
Label Activity
LNK On
Blinking
Off
SPD On
Off
6.10

60-Port Fast Ethernet Card

The 60-port Fast Ethernet (FE) card, which provides 60 FE ports and two
Gigabit Ethernet (GE) ports, is also referred to as the FE–GE card. The FE
ports are copper-based 10Base-T or 100Base-TX with selectable speeds of
132
Status LEDs on 12-Port 10/100 Ethernet Card
Color Description
Red A failure exists on the card.
None No failure exists on the card.
Green This card is in service.
None This card has failed (the FAIL LED is on).
Color Description
Green The link is up.
Green The link is up and active.
None The link is down.
Yellow The link is operating at 100 Mbps.
None The link is operating at 10 Mbps.
(1)
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09