20-Port Gigabit Ethernet 1020 Card - Ericsson SmartEdge 600 Hardware Manual

6.14.1 Status LEDs
Figure 48
Table 126 Equipment LEDs on 10-Port Gigabit Ethernet 1020 Card
Label Activity
FAIL On
Off
ACTIVE On
Off
(1) A failure can be total, partial, or forced. Failure on any part of the card, including failure of any of its ports, results in
the FAIL LED being on.
Table 127 Facility LEDs on 10-Port Gigabit Ethernet 1020 Card
Label Activity
ACT On
Off
LNK On
Off
6.15

20-Port Gigabit Ethernet 1020 Card

The 20-port Gigabit Ethernet 1020 (GE1020) card is designed for traffic
management by using the second generation of the PPAs, each of which
supports 1 GB of memory and can process data internally to match the speed
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
Status LEDs on 10-Port Gigabit Ethernet 1020 Card
Color Description
Red A failure exists on the card.
None No failure exists on the card.
Green This card is in service.
None This card has failed (the FAIL LED is on).
Color Description
Yellow The link is transmitting or receiving frames.
None The link has no active frame.
Green The link is up.
None The link is down.
Card Descriptions
(1)
143