1-Port Oc-192C/Stm-64C Card - Ericsson SmartEdge 600 Hardware Manual

Table 103 Equipment LEDs on 4-Port POS OC-48c/STM-16c Card
Label Activity
STDBY On
Off
(1) A failure can be total, partial, or forced. Failure on any part of the card, including failure of any of its ports, results in
the FAIL LED being on.
(2) Protection for cards and ports depends on the release of the SmartEdge OS.
Table 104 Facility LED on 4-Port POS OC-48c/STM-16c Card
Label Activity
LOS On
Off
6.8

1-Port OC-192c/STM-64c Card

The 1-port OC-192c/STM-64c card provides a single 9.9-Gbps SONET/SDH
port and can be used as either an optical line or optical trunk interface.
The OC-192c/STM-64c card supports PPP, HDLC, and FR encapsulations. It
also supports a frame size of up to 9,600 bytes.
This card is the same size as all other SmartEdge line cards and occupies a
single slot in the chassis. The following types of 10-Gbps XFP transceivers are
supported on any of the ports:
• SONET OC-192/STM-64 SR-1—Short Reach
• SONET OC-192/STM-64 IR-2—Intermediate Reach
• SONET OC-192/STM-64 LR-2—Long Reach
Table 105 1-Port OC-192c/STM-64c Card Specifications
Specification
(1)
Number of ports
(2)
Speed
Protection
Interface
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
Color Description
Yellow At least one of the ports on this card has been configured as a protection port.
None None of the ports on this card has been configured as a protection port.
Color Description
Yellow This port has been configured and enabled, but is experiencing an LOS.
None This port is in one of the following states:
• Has been configured (provisioned) and enabled, and is receiving or
transmitting traffic.
• Has been configured, but is currently disabled.
• Has not yet been configured.
SR-1
1
9.95 Gbps
None
SONET/SDH 10GE
interface
IR-2
1
9.95 Gbps
None
ITU-T/S-64.2b
Card Descriptions
(2)
LR-2
1
9.95 Gbps
None
ITU-T/P1L1-2D2
129