Install The Chassis Mounting Brackets - Ericsson SmartEdge 600 Hardware Manual

SmartEdge 600 Router Hardware Guide
2.1

Install the Chassis Mounting Brackets

Figure 4
Risk of equipment damage. Always use the number and type of screws
specified in the instructions.
To install brackets:
1. Position a mounting bracket against one side of the chassis, lining up the
2. Using a Phillips screwdriver, attach the bracket to the chassis with the
3. Repeat steps 1 and 2 to attach the second bracket to the other side of
22
F A
N
T R
A Y
Installing Chassis Brackets for Flush Mount Position
screw holes in the bracket with the screw holes in the side of the chassis.
screws provided with the mounting bracket; tighten to a maximum torque of
15.0 inch-lbs (1.7 Newton-meters).
the chassis.
1149
Caution!
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09