4-Port Atm Oc-3C/Stm-1C Card - Ericsson SmartEdge 600 Hardware Manual

Table of Contents

Advertisement

Table 89
Facility LEDs on 8-Port ATM OC-3c/STM-1c Card
Label
Activity
LINK
On
Blinking
Off
LOC
On
Off
REM
On
Off
6.3

4-Port ATM OC-3c/STM-1c Card

The 4-port ATM OC-3c/STM-1c Intermediate (IR) card is referred to as a
second-generation ATM OC-3c/STM1-1c card and is a low-density version
which provides two ports that are enabled through software entitlement. This
card has increased memory for each port and offers higher performance and
support for more ATM virtual paths (VPs) and PVCs than an earlier version of
the card. The SAR devices support two, four, or eight distinct CoS queues
for each ATM PVC, allowing a mix of priority- and class-based queuing for
each ATM PVC. For information about ATM VPs and PVC support, see related
documentation at https://ebusiness.ericsson.net.
The card uses two SAR devices, which perform the reassembly function on
the incoming ATM cell stream from the physical device and the segmentation
function to create the corresponding outgoing ATM cell stream.
The hardware provides HEC framing for each port; the transmit clock can be
derived either from the active controller card or from the onboard local oscillator.
This card is the same size as all other SmartEdge line cards and occupies
a single slot in the chassis.
Table 90
4-Port ATM OC-3c/STM-1c IR Card Specifications
Specification
General
(1)
Number of ports
Speed
Protection
Interface
(2)
Link power budget
Nominal wavelength
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
Color
Description
Green
Signal is present and within specifications.
Green
Signal is present and within specifications; receiving or transmitting packets
(not idle cells).
None
Port is not configured, no signal is present, or signal is not within specifications.
Yellow
Local port is in an alarm state, such as a loss of frame (LOF).
None
Local port is in a normal state.
Yellow
Remote port cannot obtain synchronization or has a defect or failure, such
as an alarm indication signal (AIS).
None
Remote port is in a normal state.
IR
4 or 2 (low-density version)
155 Mbps
1+1 APS—Bidirectional or unidirectional; revertive or
nonrevertive switching
Telcordia IR-1, SDH/STM-1 S-1.1
12 dB
1310 nm
Card Descriptions
117

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents