Reset_Univ - Siemens SIMATIC Ident Function Manual

Parameter
UID_HANDLE
BLACK_LIST
TAG_HOLD
PARAM_SET
CHANNEL_PLAN
MULTITAG
ISTM
SCANNING_MOD
E
Is not currently possible with the Ident blocks.
1)
4.5.5.6

Reset_Univ

The "Reset_Univ" instruction is a universal reset statement that can be used to reset
identification systems. Use this instruction only in consultation with Support.
Figure 4-27
Table 4- 41
Parameter
PARAM
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Data type
BOOL
BOOL
BOOL
SINT
SINT
SINT
BOOL
BOOL
Instruction "RESET_Univ"
Explanation for the instruction "RESET_Univ"
Data type
SINT [16]
4.5 Programming add-on instructions
Default values Description
False Meaning of the UID in the command:
True = Handle ID, only the least signif-
icant 4 bytes of the UID are evaluated;
False = UID/EPC-ID with a length of 8
bytes
False True = Activate Black List
False True = Activate Tag Hold
0x00 Field_ON_Control
(0 = fast; value range: 0x00, 0x02)
0x0F Field_ON_Time
(value range: 0x00 ... 0x0F; ETSI only)
0x01 Maximum number of transponders
that can be processed at the same
time in the antenna field.
(Range of values: 0x01 ... 0x50)
False True = activate intelligent single tag
mode
False True = Activate Scanning Mode
Default values Description
Data for reset frame
The data to be set here can be made
available by Support when necessary
for special settings.
Configuring the instructions
1)
57