Siemens SIMATIC Ident Function Manual page 15

Position
Data types System data types
Status data types
The Ident profile is a single complex instruction that supports all commands and functions for
Ident. The Ident instructions represent a simplified interface of the Ident profile. Each Ident
instruction contains a single command of the Ident profile.
Note
Parallel operation using Ident instruction and Ident profile is not possible
Note that the reader cannot be operated at the same time using the Ident instructions and
the Ident profile.
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Symbolic name
IID_CMD_STRUCT
IID_DATA_RF68xR
IID_DATA_RFID181EIP
IID_READSTAT_
81_RF2_3_U
IID_READSTAT_
86_RF300
IID_READSTAT_
87_RF600
IID_READSTAT_
88_RF600
IID_READSTAT_
89_RF68xR
IID_READSTAT_
A0_A1_RF600
IID_TAG_STATUS_
04_RF300
IID_TAG_STATUS_
82_RF300
IID_TAG_STATUS_
83_ISO
IID_TAG_STATUS_
84_RF600
IID_TAG_STATUS_
85_RF600
Configuring the instructions
4.2 Overview of the add-on instructions
Description
Data type for the Ident profile for setting the
command parameters.
Data type for parameter data for the reader /
communication module and data for synchro-
nizing the instructions for all read points of a
reader.
Data types for the result of "Reader_Status"
with the relevant attribute.
The data types help you to interpret the data
received from the reader and to process the
data further directly without data type conver-
sions.
Data types for the result of "Tag_Status" with
the relevant attribute.
The data types help you to interpret the data
received from the reader and to process the
data further directly without data type conver-
sions.
15