Evc Update - Planet WGSD-10020 Command Manual

cbs Setup CBS
<Cbs : 0-100000>
cir Setup CIR
<Cir : 0-10000000>
disable Disable policer
ebs Setup EBS for MEF policer
<Ebs : 0-100000>
eir Setup EIR for MEF policer
<Eir : 0-10000000>
enable Enable policer
mode Setup policer mode
aware Color-aware mode
blind Color-blind mode
coupled Coupling mode
rate-type Setup rate type
data Data rate policing
line Line rate policing
type Setup policer type
mef MEF ingress bandwidth profile
single Single bucket policer
Default:
N/A
Usage Guide:
To update a profile for EVC Policer (Ingress Bandwidth Profile).
Example:
To update EVC Policer (Ingress Bandwidth Profile) with EIR 1000 for policer 1
Switch# configure terminal
Switch (config)# evc policer update 1 eir 1000

4.2.56 evc update

Command:
evc update <EvcId : 1-4096> vid <evc_vid> ivid <ivid> interface ( * |
10GigabitEthernet | GigabitEthernet [ <port_list> ] ) learning [ disable ] policer
{ <PolicerId : 1-2048> | none | discard }
<EvcId : 1-4096>
vid Setup EVC VLAN ID
Committed Burst Size [bytes]
Committed Information Rate [kbps]
Excess Burst Size [bytes]
Excess Information Rate [kbps]
EVC identifier
-90-
Command Guide