Poe Management Mode; Poe Sequential Enable - Planet WGSD-10020 Command Manual

Switch# configure terminal
Switch (config)# poe admin-mode enable

4.2.169 poe management mode

Command:
poe management
allocation-consumption
lldp-reserved-power }
poe Power Over Ethernet
management
mode mode
allocation-consumption
allocation-reserved-power
class-consumption
class-reserved-power
lldp-consumption
lldp-reserved-power
Default:
Allocation-consumption
Usage Guide:
To configure PoE Management Mode.
Example:
To configure PoE Management Mode as LLDP-consumption mode.
Switch# configure terminal
Switch (config)# poe management mode lldp-consumption

4.2.170 poe sequential enable

Command:
poe sequential enable
poe Power Over Ethernet
mode { class-consumption
| allocation-reserved-power
Use management mode to configure PoE power management method.
Max. port power determined by allocated, and power is managed according to power
consumption.
Max. port power determined by allocated, and is managed according to reserved power.
Max. port power determined by class, and power is managed according to power consumption.
Max. port power determined by class, and power managed according to reserved power.
Max. port power determined by LLDP Media protocol, and power is managed according to
consumption.
Max. port power determined by LLDP Media protocol, and power is managed according to
reserved power.
| class-reserved-power
| lldp-consumption
-269-
Command Guide
|
|