Switchport Hybrid Acceptable-Frame-Type; Switchport Hybrid Allowed Vlan - Planet WGSD-10020 Command Manual

Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport forbidden vlan remove 5

4.2.65.125 switchport hybrid acceptable-frame-type

Command:
switchport hybrid acceptable-frame-type all | tagged | untagged
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
acceptable-frame-type
all Allow all frames
tagged Allow only tagged frames
untagged Allow only untagged frames
Default:
All
Usage Guide:
To configure acceptable-frame-type of Hybrid VLAN for specific interface
Example:
To configure acceptable-frame-type (tagged) of Hybrid VLAN for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid acceptable-frame-type tagged

4.2.65.126 switchport hybrid allowed vlan

Command:
switchport hybrid allowed vlan [all | none | add <vlan_list> | remove <vlan_list> |
except <vlan_list>]
switchport
hybrid Change PVID for hybrid port
allowed Set allowed VLAN characteristics when interface is in hybrid mode
<vlan_list> VLAN IDs of the allowed VLANs when this port is in hybrid mode
Set acceptable frame type on a port.
Switching mode characteristics
-163-
Command Guide