Logging Host; Logging Level - Planet WGSD-10020 Command Manual

transmission-delay
<1-8192> 1-8192 seconds.
Default:
2
Usage Guide:
To configure Tx transmission-delay time of LLDP
Example:
To configure Tx transmission-delay time (88) of LLDP
Switch# configure terminal
Switch (config)# lldp transmission-delay 88

4.2.115 logging host

Command:
logging host <hostname> | <ipv4_ucast>
logging Syslog
host host
<hostname> Domain name of the log server
<ipv4_ucast> IP address of the log server
Default:
0
Usage Guide:
To configure address of log server
Example:
To configure address of log server
Switch# configure terminal
Switch (config)# logging host 192.168.5.5

4.2.116 logging level

Command:
logging level error | info | warning
logging Syslog
Sets LLDP transmission-delay.
transmission of LLDP frames will delayed after LLDP configuration has changed) in seconds.)
LLDP transmission delay (the amount of time that the
-236-
Command Guide