Sflow Collector-Address; Sflow Collector-Port - Planet WGSD-10020 Command Manual

4.2.202 sflow collector-address

Command:
sflow collector-address <hostname>
sflow Statistics flow
collector-address
<hostname> IPv4 address or IPv6 address or hostname identifying the collector receiver
Default:
None
Usage Guide:
To configure the Collector address of sFlow
Example:
To configure the Collector address (10.10.10.10) of sFlow
Switch# configure terminal
Switch (config)# sflow collector-address 10.10.10.10

4.2.203 sflow collector-port

Command:
sflow collector-port <collector_port>
sflow Statistics flow
collector-port Collector UDP port
<Collector Port : 1-65535>
Default:
None
Usage Guide:
To configure the Collector port number of sFlow
Example:
To configure the Collector port number (555) of sFlow
Switch# configure terminal
Switch (config)# sflow collector-port 555
Collector address
Port number
-297-
Command Guide