Logon To The Console; Configuring Ip Address - Planet WGSD-10020 Command Manual

2.2 Logon to the Console

Once the terminal is connected to the device, power on the Industrial Managed Switch, and the terminal will display "running
testing procedures". Then, the following message asks to log-in user name and password. The factory default user name and
password are shown as follows and the login screen in
Username: admin
Password: admin
The user can now enter commands to manage the Industrial Managed Switch. For a detailed description of the commands,
please refer to the following chapters.
1. For security reason, please change and memorize the new password after this first setup.
2. Only accept command in lowercase letter under console interface.

2.3 Configuring IP Address

The Industrial Managed Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Figure 3-1
Figure 3-1: Industrial Managed Switch Console Login Screen
appears.
-26-
Command Guide