Exit; Ip Address - Planet WGSD-10020 Command Manual

Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# end
Switch#

4.2.66.3 exit

Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# exit
Switch (config)#

4.2.66.4 ip address

Command:
ip address <ipv4_addr> <ipv4_netmask>
ip Interface Internet Protocol config commands
address Address configuration
<ipv4_addr> IP address
<ipv4_netmask>
Default:
None
Usage Guide:
To configure IP address mode for specific VLAN
IP netmask
-173-
Command Guide