End - Planet WGSD-10020 Command Manual

Switch# configure terminal
Switch (config)# interface vlan 1
Switch (config-if-vlan)#
4.2.66.1 do
Command:
do < exec commands >
do To run exec commands in config mode
Default:
N/A
Usage Guide:
To run exec commands in configure terminal mode
Example:
To run "show aaa" in configure terminal mode.
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# do show aaa
console : local
telnet : local
ssh : local
http : local

4.2.66.2 end

Command:
end
end Go back to EXEC mode
Default:
Auto
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
-172-
Command Guide