Length; Location - Planet WGSD-10020 Command Manual

4.2.103.9 length

Command:
length <0 or 3-512>
length Set number of lines on a screen
<0 or 3-512> Number of lines on screen (0 for no pausing)
Default:
None
Usage Guide:
To configure displayed lines on a screen.
Example:
To configure displayed lines on a screen.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# length 10

4.2.103.10 location

Command:
location <LINE>
location Enter terminal location description
<LINE> One text line describing the terminal's location
Default:
None
Usage Guide:
To configure description of location.
Example:
To configure description (taiwan) of location.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# location taiwan
-227-
Command Guide