Port-Security; Port-Security Maximum - Planet WGSD-10020 Command Manual

Default:
Profile 1
Usage Guide:
To configure time-range profile of PoE for specific interface.
Example:
To configure time-range profile (Profile 3) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe time-range profile3

4.2.65.83 port-security

Command:
port-security
port-security
Default:
Disabled
Usage Guide:
To enable Port-security for specific interface
Example:
To enable Port-security for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # port-security

4.2.65.84 port-security maximum

Command:
port-security maximum <Number of addresses : 1-1024>
port-security
maximum Maximum number of MAC addresses that can be learned on this set of interfaces.
<Number of addresses : 1-1024>
Enable/disable port security per interface.
Enable/disable port security per interface.
Number of addresses
-139-
Command Guide