Mep <Instance> Cc; Mep <Instance> Client Domain - Planet WGSD-10020 Command Manual

4.2.125 mep <Instance> cc
Command:
mep <Instance> cc <Prio : 0-7> fr100s | fr10s | fr1m | fr1s | fr300s | fr6h | fr6m
mep Maintenance Entity Point
<Instance> The MEP instance number.
cc Continuity Check
<Prio : 0-7> Priority in case of tagged OAM. In the EVC domain this is the COS-ID.
fr100s Frame rate is 100 f/s.
fr10s Frame rate is 10 f/s.
fr1m Frame rate is 1 f/min.
fr1s Frame rate is 1 f/s.
fr300s Frame rate is 300 f/s.
fr6h Frame rate is 6 f/hour.
fr6m Frame rate is 6 f/min.
Default:
Usage Guide:
To configure CC of MEP
Example:
To configure CC of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 cc 2 fr10s
4.2.126 mep <Instance> client domain
Command:
mep <Instance> client domain { evc | vlan }
mep Maintenance Entity Point
<Instance> The MEP instance number.
client Transport layer Client
evc EVC Domain.
-242-
Command Guide